VEHICLE-SPECIFIC GVM OPTIONS
Toyota LandCruiser 300 Series
300 Series wagon — exact grade required
Supplier-listed reference factory GVM: 3,280 kg. GR Sport and Sahara ZX eligibility can differ by kit.
PRO4x4 / VEHICLE MASS & SUSPENSION
Explore the upgrade kits already listed by PRO4x4, compare their advertised ratings, and work out the potential change against your vehicle's factory GVM. Then speak with our team about fitment, engineering and compliance.
COMPARE YOUR OPTIONS
Packages are based on the current PRO4x4 GVM collection. Factory mass figures shown below are supplier-listed references, not a universal rating for every variant. Enter your vehicle's original factory GVM on a vehicle card to compare the gross mass ratings.
GVM difference = proposed package GVM − your vehicle's original factory GVM. That is not automatically the same as usable extra payload: installed kit weight and as-built vehicle mass matter.
No vehicle matches that search. For a vehicle not listed, contact PRO4x4 and we can check further options.
VEHICLE-SPECIFIC GVM OPTIONS
300 Series wagon — exact grade required
Supplier-listed reference factory GVM: 3,280 kg. GR Sport and Sahara ZX eligibility can differ by kit.
VEHICLE-SPECIFIC GVM OPTIONS
J7 single-cab and dual-cab from September 2022
The two EFS packages reference a 3,510 kg standard GVM. Check exact variant and build date.
VEHICLE-SPECIFIC GVM OPTIONS
VDJ79R; previous generation
Storefront reference: single-cab 3,400 kg, dual-cab 3,300 kg; verify exact year and cab.
VEHICLE-SPECIFIC GVM OPTIONS
J7 78 Series wagon from September 2022
EFS listing references a 3,510 kg factory rating for this specific kit.
VEHICLE-SPECIFIC GVM OPTIONS
VDJ78R
Tough Dog listing references a 3,400 kg standard GVM.
VEHICLE-SPECIFIC GVM OPTIONS
GUN / N80; specific year and drivetrain matter
EFS lists a factory reference of 2,900 kg for some models. Factory GVM varies with vehicle configuration.
VEHICLE-SPECIFIC GVM OPTIONS
MV from February 2024
EFS lists a 3,200 kg standard GVM for its eligible MV configuration.
VEHICLE-SPECIFIC GVM OPTIONS
PY / RA from June 2022
EFS references 3,230 kg for some variants; base ratings vary across the range.
VEHICLE-SPECIFIC GVM OPTIONS
PXIII, approximately 2018–2022; confirm VIN
The published PRO4x4 listing does not specify a reliable across-range factory baseline.
VEHICLE-SPECIFIC GVM OPTIONS
MY21 onward; compare exact build date and 4WD eligibility
Two ranges are listed: EFS 3,650 kg and Tough Dog 3,695 kg. Original GVM varies with grade.
VEHICLE-SPECIFIC GVM OPTIONS
2020+ generation; verify exact MY/build
Tough Dog 3,695 kg option is listed. Do not assume one factory GVM for all variants.
VEHICLE-SPECIFIC GVM OPTIONS
Y61 GU ZD30/TD42 wagon configurations
The PRO4x4 product lists a factory 3,000 kg GVM for covered vehicles.
VEHICLE-SPECIFIC GVM OPTIONS
DS series; registration, importer and model year must be verified
Verification required: PRO4x4 title says 3,889 kg, its description says 2,889 kg, and the current manufacturer page describes a 3,850 kg package.
BEFORE YOU ORDER
A GVM upgrade increases the vehicle’s permissible gross mass only after the applicable approval and certification have been completed. The nominal difference in GVM may not match net usable payload because additional suspension, bars, trays, wheel and tyre changes affect vehicle mass. Weigh the actual fitted vehicle.
GCM, tow capacity, ball load, front and rear axle ratings, tyres and wheels must be considered separately; GVM alone does not approve a towing increase. Pre-registration SSM and post-registration state engineering are not interchangeable.
Open payload calculatorGross Vehicle Mass is the approved maximum loaded mass of the vehicle, including passengers, accessories, fuel, cargo and attached towball download.
Gross Combination Mass is the approved maximum mass of the loaded towing vehicle and trailer combined. A GVM upgrade does not automatically increase GCM or towing capacity.
Second Stage Manufacture generally applies before first registration. Already registered vehicles may require state-based modification approval and engineering certification. Eligibility depends on exact kit, VIN, jurisdiction, build date, tyres and other modifications.
No. Confirm variant, model year, cab type, original GVM and approval documentation. A supplier’s published reference GVM is not a substitute for your vehicle’s identification and approvals.
PRO4x4 | QUEENSTOWN, ADELAIDE SA
Tell us your model, year, variant, VIN or registration, state, accessories, towing setup and whether the vehicle has already been registered. We'll confirm approved fitment and quote fitting and engineering conditions.
Specifications here are drawn from currently listed PRO4x4 products and supplier material and are subject to verification for your particular vehicle. They do not themselves authorise re-rating. For South Australian requirements, see SA Government light vehicle mass re-rating guidance.
PRO4x4 / HEAVY-VEHICLE GVM
Explore 12 heavy-vehicle upgrade targets across 11 model groups, based on published KME Vehicle Engineering assessment pathways and project examples. All PRO4x4 pricing is TBA. These are engineering enquiries, not pre-approved retail packages or a representation of an established supply agreement.
Compliance: Each proposed rating requires vehicle-specific assessment, engineering evidence and applicable approval. GVM over 4,500 kg can change vehicle class, driver licensing and registration requirements. GCM and towing limits are assessed separately.
No matching heavy-vehicle listings.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 6,000 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 7,500 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 8,000 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
The 6,000 kg rating is published in KME's finder and a Victorian engineering project; suitability depends on exact vehicle and modifications.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 8,000 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricingEnter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
KME documents a South Australian RAM 3500 project at 6,200 kg GVM and a 3,500 kg rear axle rating. This is a completed project reference, not a general approval for another vehicle.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
HEAVY VEHICLE · PRO4x4 ENQUIRY
KME-listed starting GVM reference: 4,490 kg. Your actual factory or current approved rating may differ.
Enter your factory GVM above for your potential gross-weight difference.
Enter loaded mass above for an estimated remaining capacity.
Published KME GVM finder reference. Final rating, registration pathway, components, axles, braking and eligibility require vehicle-specific confirmation.
Request GVM assessment & pricing*The referenced starting GVM is not a certified rating for every model. Nominal GVM uplift does not equal net usable payload. Weigh and verify the finished vehicle.
All offers subject to supplier/engineering confirmation and PRO4x4 quotation. Contact 08 8241 0788 or sales@pro4x4.com.au.
PRO4x4 GVM PACKAGE SELECTOR
Select a supplier, vehicle and package to include it in your PRO4x4 assessment enquiry. All options are subject to availability, supplier agreements, engineering approval, exact vehicle variant, state requirements and confirmed pricing.
LTZ and ZR2 variants; registration and towing specifications differ.
Use in my enquiryPre-registration packages, including different lift and suspension stages.
Use in my enquiryASV import, engine and registration-stage conditions apply.
Use in my enquiry3999 kg pre-registration package; vehicle and tyre eligibility to confirm.
Use in my enquiryLTZ and ZR2 variants; supplier flags some packages as coming soon.
Use in my enquiry4490 kg option is for converted dual cabs; wheel and tyre restrictions apply.
Use in my enquiryDifferent height and front-axle options; tow limits may differ post-registration.
Use in my enquirySeveral staged kits; some marked coming soon.
Use in my enquiryVarious suspension configurations; some offerings marked coming soon.
Use in my enquiryASV imports only; some packages marked coming soon.
Use in my enquiryPackage ratings are references only. Do not use these as your vehicle's current legal GVM or GCM without verified vehicle-specific approval documents. Some supplier-listed packages are coming soon. PRO4x4 has not yet confirmed pricing or supply arrangements for these additional ranges.
Find out how much capacity your 4x4 has left once you add passengers, accessories and touring gear. Then ask PRO4x4 to review your numbers and help plan a suitable solution.
Estimate only: Verify your exact vehicle ratings, axle loads and towing limits using its documentation and calibrated weighbridge measurements. A GVM upgrade does not automatically change GCM or towing capacity.
Use the legal ratings for your exact vehicle, including any already-approved re-rating. Leave unknown ratings blank; do not guess.
Avoid double counting: Starting mass should represent the vehicle before the additional items below. If your weighed starting mass already includes a bullbar, canopy or fuel, do not add those items again. Kerb mass definitions and included fuel differ between manufacturers.
Use the actual loaded trailer mass and measured ball download, not just the trailer's maximum ratings. When coupled, the ball load counts toward vehicle GVM; the trailer axle load counts toward the combined mass separately.
Axle loads must be measured with the vehicle and trailer set up for actual travel. The calculator does not estimate front/rear axle distribution or prove tyre, wheel, hitch or towing compliance.
Send your vehicle details and calculator results to our team for assessment. We can discuss suitable options, fitment, engineering and approval pathways.
No specific supplier package selected.
Maximum approved loaded mass of the tow vehicle, including occupants, accessories, fuel, cargo and the supported trailer ball load.
Difference between approved GVM and the vehicle's reference mass. Added accessories use some of that allowance before you load your gear.
Maximum combined loaded mass of tow vehicle plus trailer. Do not count the towball load twice.
ATM is total loaded trailer mass. GTM is the mass carried on the trailer axles when coupled; their difference is normally the supported ball load.
A vehicle can be under GVM yet overload one axle. A rear canopy, long rear overhang or heavy ball weight makes a real axle weight check especially important.
Eligibility depends on the vehicle, kit approval, registration stage, modification history and jurisdiction. A suspension lift alone is not a legal GVM upgrade.
For South Australian vehicles, contact PRO4x4 about pre- and post-registration processes and engineering requirements. Requirements vary by jurisdiction and vehicle. Vehicles re-rated above 4,500 kg enter the heavy-vehicle category.